HELLA - Lighting catalogue

Mounting bushes
For beacons with tubular fitting.
With built-in electrical socket to DIN 72 591 and rubber protecting cap.
Part no.
For mounting beacon on support at side
of vehicle or for welding to a flange,
24 mm dia., approx 100 mm.
8HG 002 365-001 1 Mounting bush, complete
8HG 006 294-101 1 Mounting bush with separate ground connection
Spare parts:
8HG 096 531-007 2 Holder for -001
8JB 850 434-011 10 Socket
9GH 096 532-001 10 Rubber protecting cap
8HG 006 294-051 1
8HG 006 294-091 1
8HG 006 294-011 1
8HG 006 294-021 1
Mounting bush
with screw fixing
with screw fixing anbd
separate ground connection
For screwing onto horizontal
cabin roofs (on top)
Mounting bush for screwing onto horizontal
cabin roofs (on side)
With 90 mm mounting bracket
8HG 006 294-111 1 with 50 mm mounting bracket
8HG 006 294-131 1
8HG 006 294-031 1
8HG 006 294-141 1
8HG 006 294-151 1
8HG 006 294-041 1
Accessories for Beacons
Pk.
Mounting bush
with 90° angle of rotation
Mounting bush, can be swivelled,
for screwing onto horizontal and
vertical cabin roofs
for screwing onto horizontal and vertical cabin
roofs
(bracket can be adjusted on sloped surfaces)
Extension bar, can be swiveled upwards,
for screwing onto horizontal and
vertical cabin roofs
(bracket can be adjusted on sloped surfaces)
Length: 1000 mm
Extension: up to 700 mm.
Telescopic holder
for screwing onto back of cabin roof.
Black push-on pipe with thread M8.
8HG 990 368-001 1
Mounting bush, for screwing onto horizontal
cabin roofs (on top)
8HG 990 368-007 50
Spare parts:
8JB 850 434-011 10 Socket
9GH 096 532-001 10 Rubber protecting cap
LHT 11
6.21
6