HELLA - Lighting catalogue

Work Lights
Work lights
for upright or pendant mounting
Lens pattern for far-reaching illumination.
With grommet. Light aperture: 180 mm dia.
Recommended angle of inclination: 10° - 20°.
Steel body with matt black finish.
Steel reflector with glass lens bonded.
Rubber boot prevents lateral scattered light.
With pivot base, without vibration damping.
Pivot range vertical 130°. Type of protection: IP5K4K.
Part no.
Pk.
1G8 002 340-001 1
1G8 002 340-011 1
H3 work light
with bracket for four-point mounting
H3 work light
with 2500 mm rubber tube,
2-pole low voltage plug
8JA 001 925-001 (Pk.2) and
mounting clamp for mounting
on 24 mm dia. standard pin,
as well as on 30 mm dia. standard pin
after removing reducing sleeve from pipe fitting
1G8 132 233-011 1
Spare parts/Accessories:
Light unit with lens-retaining rim
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Accessories see page 4.122
4.120 LHT 11