HELLA - Lighting catalogue

Work Lights
Master 5060
Lens pattern for far-reaching illumination.
With grommet. Light aperture: 135 x 75 mm.
Recommended angle of inclination: 15° - 20°.
Reflector made of sheet steel, glued to glass lens.
Black plastic body with extending edge to protect lens.
Type of protection: IP5K4K.
Part no.
Pk.
1GA 005 060-001 1
1GA 132 459-011 1
Spare parts:
Light unit
9AG 132 453-005 5 Lens-retaining rim
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Master 5060
1GA 005 060-041 1
1GA 005 060-337 30
Accessories see page 4.123 - 4.125
H3 work light
with pivot base with M10 fixing screw
for upright or pendant mounting
Lens pattern for close-range illumination.
With grommet. Light aperture: 135 x 75 mm.
Recommended angle of inclination: 15° - 20°.
Reflector made of sheet steel, glued to glass lens.
Black plastic body with extending edge to protect lens.
Type of protection: IP5K4K.
Part no.
H3 work light
with pivot base with M10 fixing screw
for upright or pendant mounting
H3 built-in work light
with 2 fixing screws 3.5 x 25 mm
and 12V55W bulb.
Mounting area: 152 x 92 mm
9AG 132 453-005 5
Spare parts/Accessories:
Lens-retaining rim
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Work Lights
LHT 11
4.73
Pk.
4