HELLA - Lighting catalogue

Work Lights
Work lights
for upright or pendant mounting
Mega-Beam with FF® reflector
Light aperture: 83 x 92 mm.
Reflector made of diecast aluminium, glued to hardened glass lens.
Grey body and cover rim. Black lens-retaining rim with extending edge
to protect lens.
Pivot base with vibration damping and bracket for four-point mounting.
Pivot range vertical 145°.
Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GM 996 134-321 1
FF®-H3 work light
lens pattern for long-range ground illumination.
recommended angle of inclination: 15° - 25°,
with grommet
1GM 996 134-171 1 with AMP plug connector and protection cap
1GM 996 134-061 1
1GM 996 134-081 1
1GM 996 134-051 1
1GM 996 134-071 1
FF®-H3 work light
with lens pattern for ground illumination.
recommended angle of inclination: 10° - 15°,
with grommet and lens without optical pattern
with lens without optical pattern,
AMP plug connector and cap
FF®-H3 work light
with lens pattern for long-range illumination,
recommended angle of inclination: 2° - 5°,
with grommet and lens without optical pattern
with lens without optical pattern,
AMP plug connector and cap
9GH 993 984-001 1
Spare parts/Accessories:
Cap for AMP plug connector
9XD 990 298-001 5 Bracket for four-point fixing
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
2000 mm long connecting lead
8KB 990 299-001 1 for AMP plug connector with cap
Accessories see page 4.123 - 4.125
4.106 LHT 11