HELLA - Lighting catalogue

Light Series
Work lights for horizontal flush mounting
Module 6213
Double Beam with FF® reflector
With grommet. Light aperture: 148 x 84 mm.
Double reflector made of diecast aluminium, glued to glass lens.
Black plastic body and supporting frame, with pan-head tapping screws
made of stainless steel 4.2 x 45 mm.
Distance between screws 160 mm.
Inclination (6° up and downwards) can be adjusted.
Mounting area: 148 x 88 mm.
With 250 mm long connecting lead. Type of protection: IP5K4K.
Part no.
Pk.
1GB 996 080-001 1
1GB 996 080-011 1
1GB 996 080-021 1
1GB 996 080-031 1
FF®-H3 work light
for front or rear flush mounting in
vehicle roof.
With lens pattern for object illumination for
vertical surfaces.
Recommended angle of inclination: 15° - 35°,
without bulbs
Lens pattern for ground illumination.
Recommended angle of inclination: 5° - 15°,
with 2 bulbs 12V55W
FF®-H3 work light
for front flush mounting in vehicle roof.
Light falling on the engine of the bon net reduced
to a minimum in order to avoid dazzling off the
driver. Lens pattern for far-reaching off-road
illumination.
Recommended angle of inclination: 2° - 10°,
without bulbs
Lens pattern for ground illumination.
Recommended angle of inclination: 20° - 30°.
without bulbs
8GH 002 090-271 1
Spare parts/Accessories:
H3 bulb,
12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
9BG 993 345-001 1 Rubber body for sealing installation opening
Black plastic body with mounting bracket
for use light as external-fitting work light
9BG 990 178-011 1 with grommet
4-pole socket
8JD 008 151-041 10 for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
9XD 990 298-001 5 Bracket for four-point mounting
4.66 LHT 11