HELLA - Lighting catalogue

Work lights
for upright or pendant mounting
Picador 6876 with FF® reflector
Lens pattern for long-range illumination.
Recommended angle of inclination: 15° - 20°.
Lens with plastic reflector bonded.
Black plastic body and lens-retaining rim.
Lens-retaining rim with extending edge to protect lens.
Universal bracket with M10 fixing screw
Pivot range: horizontal 130°. Type of protection: IP5K4K.
Part no.
Pk.
1GB 996 102-101 1
FF®-H3 work light
with pivot base
8GH 002 090-271 1
Spare parts/Accessories:
H3 bulb,
12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
8HG 004 806-001 1 Magnet bracket
9XD 130 261-001 1 Bracket for four-point fixing
External-fitting work lights
Picador 6875 with FF® reflector
1GA 006 875-001 1
8GH 002 090-271 1
Spare parts:
H3 bulb,
12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
Accessories see page 4.123 - 4.125
FF®-H3 work light
with side rotary pivot base
Work Lights
Lens pattern for ground illumination.
With grommet. Light aperture: 125 x 75 mm.
Recommended angle of inclination: 20° - 25°.
Lens with plastic reflector bonded.
Black plastic body and lens-retaining rim.
Lens-retaining rim with extending edgeto protect lens.
Universal side bracket with M10 mounting
screw for attachment to vertical surfaces.
Pivot range: horizontal 150°, vertical 90°. Type of protection: IP5K4K.
Part no.
LHT 11
4.75
Pk.
4