HELLA - Lighting catalogue

External-fitting work lights
Oval 100 Xenon
Lens pattern for bride close-range illumination.
With gas discharge bulb. Light aperture: 130 x 75 mm.
Recommended angle of inclination: 3° - 10°.
Reflector made of diecast aluminium,
glued to hardened glass lens.
Black plastic body and red lens-retaining rim
with red extending edge to protect lens.
Rear of housing made of black diecast aluminium
with 100 mm lead and 2-pole AMP plug connector.
Work light permanently connected to ballast unit by a 500 mm long lead.
Vibration-damped pivot base with bracket for four-point mounting.
Type of protection: IP5K9K. System capacity: 50W.
Part no.
Pk.
1GA 996 461-591 1
Xenon work light
with 500 mm lead and
2-pole AMP plug
for upright mounting,
with 12V ballast unit
1GA 996 461-601 1 with 24V ballast unit
Spare parts:
8GS 009 028-021 1 D1S gas discharge bulb, 35W
Built-in headlights
Oval 120
With H4 light, position light, 12V bulbs and protection cap.
Light aperture: 161 x 100 mm.
Black plastic mountig frame
with inclination adjustment 4°.
Reflector made of plastic, glued to non-patterned glass lens.
Two M5 x 35 mm fixing screws.
Part no.
Pk.
1LB 996 157-201 1 H4 built-in headlight
8GJ 002 525-131 1
Spare parts/Accessories:
H4 bulb,
12V60/55W
8GJ 002 525-251 1 24V75/70W
T4W bulb,
8GP 002 067-121 10 12V4W
8GP 002 067-241 10 24V4W
Accessories see page 4.123 - 4.125
Light Series
LHT 11
4.61
4