HELLA - Lighting catalogue

Beamsetters
Beamsetters
SEG IV A / AL
With analogue display and deflection mirror
to enable the test monitor to be seen from behind.
The laser positioning aid makes precise alignment
of the beamsetter box to the headlight
possible. This means that bulbs can be sighted directly,
particularly for free-form headlights.
Part no.
Pk.
8PA 007 732-003 1
SEG IV AL
Contents: beamsetter box, broad-band sight
and wheel-mounted base
8XT 861 234-003 1 Column, 1.2 m long (to be ordered separately)
8PA 007 732-013 1
Same as SEG IV AL, but
without laser positioning aid
SEG IV A
Contents: beamsetter box,
broad-band sight and wheel-mounted base
8XT 861 234-003 1 Column, 1.2 m long (to be ordered separately)
8PL 861 660-001
Spare parts/Accessories:
Lux-/Voltmeter
9EV 861 038-001 1 Window for console
9ST 861 074-001 1 Button
8PV 861 112-021 1 Broad-band sight without holder
9SG 855 498-001 1 Handwheel for sight holder
9SG 855 454-011 5 Handwheel for fixing the column in place
9XD 857 744-001 1 Clamp for column
9XS 862 004-001 1 Set of wheels (3 pieces)
Red cover, with deflection mirror and
9XS 861 127-051 1 attachment material
8PV 861 112-011 1 Laser sight
Accessories:
Adjusting device for all SEG's.
Part no.
Pk.
8PD 860 755-001 1 Adjusting device
Accessories:
Further spare parts are available.
Replacement requires re-adjustment
of the beamsetter.
This is carried out by a specially equipped
Hella agency or wholesaler.
Rail kit for SEG IV
For workshops with a large vehicle volume,
it makes sense to mount the beamsetter on rails.
The recommended rail length is min. 3 m.
Part no.
Pk.
9XS 861 736-001 1 Rail kit, 1,5 m with fixing materials
7.04 LHT 11