HELLA - Lighting catalogue

External-fitting work lights
AS 200 Xenon
Lens pattern for long-range illumination.
With gas discharge bulb, 24V ballast unit and
200 mm connecting lead. Light aperture: 123 x 123 mm.
Recommended angle of inclination: 3° - 10°.
Lens with plastic reflector bonded.
Black plastic body with extending edge to protect lens.
With red decorative ring. Handle recessed into body.
Xenon electronic unit 42W integrated into body.
Pivot base with bracket.
Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GA 996 142-061 1
1GA 996 142-071 1
1GA 996 142-081 1
1GA 996 142-091 1
1GA 996 142-131 1
Xenon-work light
with 12V ballast unit, AMP plug connector and
3100 mm long connecting lead with relay and fuse
with 24V ballast unit, AMP plug connector and
3100 mm long connecting lead with relay and fuse
with 12V ballast unit, AMP plug connector,
switch with integrated fuse and
2500 mm long connecting lead
with 24V ballast unit, AMP plug connector,
switch with integrated fuse and
2500 mm long connecting lead
with 24V ballast unit, AMP plug connector and
black decorative ring, without connecting lead
1GA 990 305-011 1
Spare parts/Accessories:
Light unit
8GS 007 949-101 1 D2S gas discharge bulb, 35W
9GH 993 984-001 1 Cap for AMP plug connector
3100 mm long connecting lead with relay
and fuse for AMP plug connector,
8KB 990 299-121 1 24V (for -071)
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
8HG 990 320-001 1 Bracket attachment foot
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
1GA 996 142-151 1
1GA 996 142-251 1
with 24V ballast unit, PG-screw connection
and 3000 mm long connecting lead,
without relay and fuse.
Sealed version
with 230V ballast unit,
PG-screw connection and 10.000 mm
rubber lead with ground contact.
Suitable in connection with current generator
230V-VSG 40W
Spare parts:
8GS 007 949-101 1 D2S gas discharge bulb, 35W
Work Lights
LHT 11
4.81
4