HELLA - Lighting catalogue

External-fitting work lights
AS 200 Xenon
Lens pattern for long-range illumination.
With gas discharge bulb, 24V ballast unit and
200 mm connecting lead. Light aperture: 123 x 123 mm.
Recommended angle of inclination: 3° - 10°.
Plastic reflector with glass lens bonded.
Black plastic body with extending edge to protect lens. With red decorative ring.
Handle recessed into body.
Xenon electronic unit 24V42W integrated into body.
With pivot base and bracket.
Switch with integrated fuse 15A.
With 2500 mm rubber tube and 2-pole low voltage plug 8JA 001 925-001.
Easy-to-loosen pipe fitting mount 24 mm dia.,
fits 30 mm dia. attachment pin in combination
with joint 9XS 027 639-001.
Can be used with tripod 8XT 002 117-001 and
8XT 002 120-001 as well as socket 8XT 002 121-001.
Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GA 996 142-221 1 Xenon-work light
Spare parts/Accessories:
1GA 990 305-011 1 Light unit
8GS 007 949-101 1 D2S gas discharge bulb, 35W
8JA 001 925-001 1 Plug, 2-pole
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
9XS 027 639-001 1 Joint
Work Lights for mounting
Conforms to DIN 14 644.
Light aperture: 250 mm dia.
750 m range with 12V55W
800 m range with 24V70W.
Flat lens without optical pattern. Steel reflector.
Black finish steel body and lens retaining rim.
Two side handles, built-in switch.
2500 mm long lead with low voltage plug 8JA 001 925-001 (Pk. 2).
Easy-to-loosen pipe fitting mount 24 mm dia., fits 30 mm dia. attachment pin
in combination with joint 9XS 027 639-001.
Can be used with tripod 8XT 002 117-001and 8XT 002 120-001
as well as socket 8XT 002 121-001.
Type of protection: IP5K4K.
Part no.
Pk.
1G9 001 523-021 1 H3 work light
8JA 001 925-001 1
Spare parts/Accessories:
Plug, 2-pole
H3 bulb,
8GH 002 090-271 1 12V35W
8GH 002 090-133 1 12V55W
8GH 002 090-251 1 24V70W
9XS 027 639-001 1 Joint
Accessories see page 4.122
Work Lights
LHT 11
4.121
4