HELLA - Lighting catalogue

Work Lights
External fitting work lights for upright mounting
Mega Beam Xenon
With gas discharge bulb. Light aperture: 83 x 92 mm.
Recommended angle of inclination: 10° - 15°.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black plastic body and lens-retaining rim, red plastic cover rim with
extending edge to protect lens.
Pivot base with vibration damping and bracket for four-point mounting
made of stainless steel.
Pivot range vertical 70°.
For upright mounting.
Work light permanently connected to ballast unit 42W by a 300 mm long lead.
With 3700 mm long connecting lead, relay and 15A fuse.
Type of protection: IP5K4K.
Part no.
Pk.
1GM 996 135-001 1
1GM 996 135-041 1 and 24V ballast unit
1GM 996 135-051 1
Xenon work light
with lens pattern for close-range illumination
and 12V ballast unit
Xenon work light
with lens pattern for long-range illumination
and 24V ballast unit
8GS 007 949-101 1
Spare parts:
D2S gas discharge bulb, 35W
Ballast unit,
5DV 990 264-001 1 12V
5DV 990 264-011 1 24V
3700 mm long connecting lead from ballast unit
8KB 149 147-001 1 to battery, with relay and fuse, 12V
Accessories see page 4.123 - 4.125
4.102 LHT 11