EuroSDR Projects - Host Ireland

44
Test site
Participant Espoonlahti Hermanni Senaatti Amiens
CyberCity 87 76 75
Hamburg 69 33 69
Stuttgart 60 25 31
IGN 66 26 28 75
ICC laser+aerial 80 33 36
Nebel+Partner 76 47 34
ICC laser 62 24 24
Delft 35 1) 33
Aalborg 20
FOI 41 23 28 63
FOI outlines 73 1) 29 1) 100 1)
C+B Technik 59 1) 32 1) 23 1) 50 1)
Dresden 47 2) 57 3)
1) Only buildings with given ground plan extracted. 2) Only one building extracted. 3) Five buildings
extracted.
Table 4-1: Total amount [%] of reference points that could be found from produced 3D-models.
4.1.2 Extracted Building Vectors
Extracted building vectors (top view) are shown in Figure 4-1 (Espoonlahti), Figure 4-2 (Hermanni),
Figure 4-3 (Senaatti) and Figure 4-4 (Amiens). CyberCity produced the most detailed models in the
FGI test sites, especially in Hermanni and Senaatti, as can be seen from Table 4-1 and the figures
below. They were the only participant that also modeled chimneys and equivalent smaller objects on
roofs, which would be impossible to identify using only laser scanner data on test sites where the
point density is low. Test site visualizations delivered by participants are shown in Appendix 1.