Transmission and Differential.pdf - Ken Gilbert

3-2 [W12C2] SERVICE PROCEDURE
12. Overall Transmission
5) Insert range select lever, and tighten bolt.
Tightening torque:
6±1 N·m (0.6±0.1 kg-m, 4.3±0.7 ft-lb)
6) Insert manual lever and parking rod.
7) Insert spring pin to manual lever.
B3M1096A
B3M1085A
B3M1083A
66
8) Install the low and reverse piston.
CAUTION:
Be careful not to tilt the piston when installing.
Be careful not to damage the lip seal.
9) Install return spring.
10) Install spring retainer.
11) Install the one-way clutch inner race.
B3M1097A
B3M1098A
B3M1099B