Transmission and Differential.pdf - Ken Gilbert

2) Install extension case to transmission case.
(1) Tighten 11 bolts.
Tightening torque:
25±2 N·m (2.5±0.2 kg-m, 18.1±1.4 ft-lb)
(2) Install select cable.
Tightening torque:
14±4 N·m (1.4±0.4 kg-m, 10.1±2.9 ft-lb)
G3M0308
3) Install vehicle speed sensor 1 (rear).
Tightening torque:
T: 7±1 N·m (0.7±0.1 kg-m, 5.1±0.7 ft-lb)
B3M1043A
4) Install rear crossmember.
(1) Tighten bolts.
Tightening torque:
T1: 34±5 N·m (3.5±0.5 kg-m, 25.3±3.6 ft-lb)
T2: 69±15 N·m (7.0±1.5 kg-m, 51±11 ft-lb)
S2M0221B
(2) Lower and remove transmission jack.
SERVICE PROCEDURE
41
[W5B0] 3-2
5. Transfer Duty Solenoid and Transfer Valve Body
5) Install propeller shaft.
NOTE:
Align matching marks on propeller shaft and rear
differential coupling.
G3M0782
6) Install front and center exhaust pipe assembly.
7) Lower and remove jack.
8) Connect the following parts:
(1) Oxygen sensor connector
(2) Transmission harness connector
G3M0305
S2M0212A