GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Loading Instruments ÿ page 13<br />
like organ that<br />
has a continuous<br />
tone, as the effects<br />
of the GigaPulse,<br />
which we’ll<br />
cover later, won’t<br />
be as dramatic<br />
or obvious.)<br />
<strong>GigaStudio</strong> starts<br />
pulling data off<br />
your hard drive<br />
as fast as it can,<br />
<strong>and</strong> stuffs it into<br />
the selected slot. A<br />
bar shows loading<br />
progress; loading<br />
may take a few<br />
seconds with<br />
large fi les. Note that you can also drag <strong>and</strong> drop <strong>GigaStudio</strong><br />
Instruments <strong>and</strong> Performances into a slot.<br />
5 Now select slot 2 <strong>and</strong> load another instrument. When loading<br />
is done, each slot shows the name of the loaded instrument.<br />
6 If you’re using<br />
an external MIDI<br />
keyboard, Slot 1<br />
responds to channel<br />
1, Slot 2 responds to<br />
channel 2, <strong>and</strong> so<br />
on. Set the channel<br />
of your master<br />
keyboard to drive<br />
the appropriate slot.<br />
The virtual keyboard<br />
will play whichever<br />
slot is selected<br />
— no channel setting<br />
required.<br />
$ %<br />
^<br />
LOADING INSTRUMENTS<br />
13