GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam

Searching and Loading ÿ page 9
SEARCHING AND LOADING
Next we’ll locate sounds, then load them. If you know where
all your sounds are, you can of course just select them manually.
But for now, pretend you don’t have a clue where they are, and
let’s use the Search function. First, we’ll set up some search
criteria.
1 Click on the right-most icon in the
QuickSound Toolbar. This
brings up the QuickSound settings window.
2 “ Recursive” should already be checked under Search mode so
that GigaStudio will search in folders within folders. If you
select “Local,” the search will take place only in the folder
(directory) you specifi ed in the Folder Tree. Under Results
Properties, check “Show Only Instruments that Match
Search” to keep things simple for now.
3 Click on the “ “Advanced “ Advanced Settings
” button to open another
window where you can select particular drives to include or
exclude, as well as what File Types you want to include in the
!
LOADING INSTRUMENTS
9