GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam

More documents

Recommendations

Info

CREATING AND EDITING AN INSTRUMENT 36 page 36 ÿ GigaStudio 3 Quick Start Guide 2 Although drag and drop is convenient, you can also right-click in the Samples Window to bring up a sample management menu: Import, export, copy, delete, and sort samples, as well as many other functions. bl All four folders are now in the Samples Window. At this point, the Default Sample Group folder isn’t necessary, so click on it and hit the computer’s Delete key. If you’re asked whether you’re sure you want to delete it, click on “Yes.” BL
Meet The Wizard ÿ page 37 MEET THE WIZARD The Wizard is the quickest way to build up many types of instruments. What you’re about to do for the next couple of minutes would take much longer if done manually, without the Wizard. 1 Click on the Instrument Wizard icon. 2 Using the Wizard involves following steps in order. In this fi rst one, give the Instrument a name. Then set the Dimension Key Start to C-1 (type it in, use the up and down arrows, or click and drag on the “spinner” control between the two arrows) and the Dimension Key End to G9. Actually these values aren’t critical, but we might as well cover the maximum possible range for now. Click on Next when you’re ready for the next step. 3 Click on “ Make a Region per Sample.” This tells the Instrument Editor that you want to assign each sample to the keyboard and create a region for it. The other option, “Create Region Every ___ Half Steps” creates regions, each of which contains a uniform number of half steps. This would be a better choice if, for example, you had an instrument that was sampled every half step, as each region could be exactly one half step. For “Start at Note” and “End at Note,” enter C-1 and G9 respectively (same values as in Step 1). When you’re done, click “Next.” ! @ # MEET THE WIZARD 37
Page 1 and 2: ÿ page 1 Contents Initial Setup 2
Page 3 and 4: Inital Setup ÿ page 3 the left), c
Page 5 and 6: Inital Setup ÿ page 5 2 If you don
Page 7 and 8: Getting To Know Giga ÿ page 7 this
Page 9 and 10: Searching and Loading ÿ page 9 SEA
Page 11 and 12: Searching and Loading ÿ page 11 2
Page 13 and 14: Loading Instruments ÿ page 13 like
Page 15 and 16: Editing Instruments ÿ page 15 2 No
Page 17 and 18: Meet QuickEdit ÿ page 17 Although
Page 19 and 20: Stacking Instruments ÿ page 19 bef
Page 21 and 22: DSP ÿ page 21 per band), Dynamics
Page 23 and 24: DSP ÿ page 23 DSP - INSERTING EFFE
Page 25 and 26: DSP ÿ page 25 4 While GigaPulse st
Page 27 and 28: Creating a Distributed Wave Instrum
Page 33 and 34: Creating and Editing an Instrument
Page 35: Creating and Editing an Instrument
Page 39 and 40: Meet The Wizard ÿ page 39 yet. Aft
Page 41 and 42: Meet The Wizard ÿ page 41 ˘ (4) s
Page 43 and 44: Meet The Wizard ÿ page 43 “Attac
Page 45 and 46: M Index ÿ page 45 Make a Region pe
Page 47 and 48: NOTES

GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?