GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
GigaStudio 3 Installation and Use: QuickStart Guide - 4.37 - Tascam
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Editing Instruments ÿ page 15<br />
2 Note that you can return<br />
most <strong>GigaStudio</strong> controls<br />
(including volume, tune, <strong>and</strong><br />
pan) to their default position by<br />
Ctrl-clicking on the control.<br />
The volume, tune, <strong>and</strong><br />
pan parameters can also be<br />
assigned to MIDI controllers.<br />
Click on the small triangle<br />
to the right of the parameter<br />
name to see a list of controllers<br />
like the one above (this<br />
shows that Controller #7, the<br />
st<strong>and</strong>ard MIDI control for<br />
volume, is assigned to the<br />
selected parameter — in this<br />
case, volume). Also note that<br />
Fine Tune <strong>and</strong> Coarse Tune are<br />
at the end of the list.<br />
Select an Instrument slot<br />
<strong>and</strong> click on some virtual<br />
keys to hear it. Adjust the<br />
volume, pan, <strong>and</strong> tune controls<br />
to hear their effect on the<br />
sound. Then audition any<br />
other Instruments that are in<br />
other slots. When you’re done,<br />
return all parameters to their<br />
default positions.<br />
LOADING INSTRUMENTS<br />
15