20.08.2013 Views

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Contents<br />

Connections<br />

2 Limit<br />

Make a sett<strong>in</strong>g for maximum volume.<br />

60 (–20dB) / 70 (–10dB) / 80 (0dB)<br />

Off (Default)<br />

Playback<br />

2 Power On Level<br />

Def<strong>in</strong>e the volume sett<strong>in</strong>g that is active when the power is turned on.<br />

Last (Default) : Use the memorized sett<strong>in</strong>g from the last session.<br />

Mute : Always use the mut<strong>in</strong>g on condition when power is turned on.<br />

1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.<br />

2 Mute Level<br />

Set the amount of attenuation when mut<strong>in</strong>g is on.<br />

Full (Default) : The sound is muted entirely.<br />

–40dB : The sound is attenuated by 40 dB down.<br />

–20dB : The sound is attenuated by 20 dB down.<br />

Sett<strong>in</strong>gs<br />

Audyssey<br />

Front panel Display Rear panel 167 Remote<br />

Index<br />

Tips<br />

Appendix<br />

Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic<br />

Volume®, Audyssey LFC and Audyssey DSX®. These can be selected<br />

after Audyssey® Setup has been performed. For additional <strong>in</strong>formation on<br />

Audyssey technology, please see page 257.<br />

%<br />

• “MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume” and “Audyssey LFC”<br />

sett<strong>in</strong>gs are stored for each <strong>in</strong>put source.<br />

• “MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume” and “Audyssey LFC”<br />

cannot be set when the sound mode is set to “DIRECT” or “PURE DIRECT”.<br />

2 MultEQ® XT32<br />

MultEQ® XT32 compensates for both time and frequency characteristics<br />

of the listen<strong>in</strong>g area based on Audyssey® Setup measurement results.<br />

Selection is done from three types of compensation curves. We<br />

recommend the “Audyssey” sett<strong>in</strong>g.<br />

Audyssey (Default) : Optimize the frequency response of all speakers.<br />

Audyssey Byp. L/R : Optimize frequency response of speakers except<br />

front L and R speakers.<br />

Audyssey Flat : Optimize frequency response of all speakers to flat<br />

response.<br />

Graphic EQ : Apply frequency response set with “Graphic EQ”<br />

(vpage 171).<br />

Off : Turn “MultEQ® XT32” equalizer off.<br />

%<br />

• When us<strong>in</strong>g headphones, “MultEQ® XT32” is automatically set to “Off”.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!