Owner's Manual in English - Marantz US | Home

Contents
Connections
Playback
2 Subwoofer level error message and how to
adjust
The optimal level of each subwoofer channel for Audyssey Setup
measurement is 75 dB.
During subwoofer level measurement (vpage 183 “Audyssey®
Setup”), an error message is displayed when one level of subwoofers
is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust the
subwoofer volume so that the subwoofer level is within the 72 to 78
dB range.
GError messageH
Audyssey Setup
Your Subwoofer 1’s level is too high.
If your subwoofer has a volume control on it,
Select “SW Level Matching” to interactively adjust the level of
your subwoofer.
If your subwoofer does not have a volume control,
or if you do not want to use a subwoofer, select “Skip”.
Back Skip
SW Level Matching
Settings
Front panel Display Rear panel 191 Remote
Index
1
2
3
Tips
Appendix
Select “SW Level Matching” and then press ENTER.
Adjust the volume control on your subwoofer so that
the measured level is within the 72 to 78 dB range.
When the measured level is within the 72 to 78 dB
range, select “Next” and then press ENTER.
• If you use two subwoofers, the second subwoofer’s adjustment
will be started.
Repeat the operation from step 2, 3.
Retrieving Audyssey® Setup settings
If you set “Restore...” to “Restore”, you can return to Audyssey® Setup
measurement result (value calculated at the start by MultEQ® XT32) even
when you have changed each setting manually.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start