20.08.2013 Views

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Contents<br />

Connections<br />

Playback<br />

2 Front Height<br />

Set the presence and size of the front height speakers.<br />

Large : Use a large speaker that can adequately play back very low<br />

bass frequencies.<br />

Small (Default) : Use a small speaker that has <strong>in</strong>adequate playback<br />

capacity for very low bass frequencies.<br />

None : Select when the front height speakers are not connected.<br />

%<br />

• When “Assign Mode” (vpage 192) sett<strong>in</strong>g is “9.1ch(SB/FH/FW)”,<br />

“7.1ch + ZONE2”, “7.1ch(Bi-Amp)” or “7.1ch + Front B”, you can make the<br />

“Surr. Back” sett<strong>in</strong>g.<br />

2 Front Wide<br />

Set the presence and size of the front wide speakers.<br />

Large : Use a large speaker that can adequately play back very low<br />

bass frequencies.<br />

Small (Default) : Use a small speaker that has <strong>in</strong>adequate playback<br />

capacity for very low bass frequencies.<br />

None : Select when the front wide speakers are not connected.<br />

%<br />

• When “Assign Mode” (vpage 192) sett<strong>in</strong>g is “9.1ch(SB/FH/FW)”,<br />

“7.1ch + ZONE2”, “7.1ch(Bi-Amp)” or “7.1ch + Front B”, you can make the<br />

“Surr. Back” sett<strong>in</strong>g.<br />

Sett<strong>in</strong>gs<br />

Distances<br />

Front panel Display Rear panel 195 Remote<br />

Index<br />

Tips<br />

Appendix<br />

Set distance from listen<strong>in</strong>g position to speakers.<br />

Measure beforehand the distance from the listen<strong>in</strong>g position to each<br />

speaker.<br />

2 Unit<br />

Set the unit of distance.<br />

Feet (Default)<br />

Meters<br />

2 Step<br />

Set the m<strong>in</strong>imum variable width of the distance.<br />

1ft (Default) / 0.1ft<br />

0.1m / 0.01m

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!