20.08.2013 Views

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Contents<br />

Connections<br />

2 Desired sound does not come out<br />

Playback<br />

Sett<strong>in</strong>gs<br />

Front panel Display Rear panel 231 Remote<br />

Index<br />

Tips<br />

Appendix<br />

Symptom Cause/Solution Page<br />

The volume does not <strong>in</strong>crease. • The maximum volume is set too low. Set the maximum volume us<strong>in</strong>g “Limit”on the menu.<br />

• Appropriate volume correction process<strong>in</strong>g is performed accord<strong>in</strong>g to the <strong>in</strong>put audio format<br />

and sett<strong>in</strong>gs, so the volume may not reach the upper limit.<br />

No sound comes out with the HDMI • Check the connection of the HDMI connectors.<br />

connection.<br />

• When outputt<strong>in</strong>g HDMI audio from the speakers, set “HDMI Audio Out” on the menu to<br />

“AVR”. To output from the TV, set “TV”.<br />

• When us<strong>in</strong>g the HDMI control function, check that the audio output is set to the AV amplifier<br />

on the TV.<br />

No sound comes out of a specific<br />

speaker.<br />

No sound is produced from<br />

subwoofer.<br />

• Check that the speaker cable is properly connected.<br />

• Check that a selection other than “None” is set for the “Speaker Config.” sett<strong>in</strong>g <strong>in</strong> menu.<br />

• Check the “Assign Mode” sett<strong>in</strong>g <strong>in</strong> the menu.<br />

• When the sound mode is “STEREO” and “VIRTUAL”, audio is only output from the front<br />

speakers and subwoofer.<br />

• Check the subwoofer connections.<br />

• Turn on the subwoofer’s power.<br />

• Set “Speaker Config.” – “Subwoofer” on the menu to “2 spkrs” or “1 spkr”.<br />

• When “Speaker Config.” – “Front” <strong>in</strong> the menu is set to “Large”, depend<strong>in</strong>g on the <strong>in</strong>put<br />

signal and the sound mode, no sound may be output from the subwoofer.<br />

• When no subwoofer audio signal (LFE) is <strong>in</strong>cluded <strong>in</strong> the <strong>in</strong>put signals, no sound may be<br />

output from the subwoofer.<br />

• You can make the subwoofer always output sound by sett<strong>in</strong>g the subwoofer mode to<br />

“LFE+Ma<strong>in</strong>”.<br />

167, 204<br />

–<br />

40, 41, 44, 45,<br />

46<br />

173<br />

132<br />

32<br />

193, 194<br />

192<br />

–<br />

33<br />

–<br />

194<br />

193<br />

198<br />

198

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!