20.08.2013 Views

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Contents<br />

Connections<br />

Playback<br />

Sett<strong>in</strong>gs<br />

2 Operations cannot be performed through the remote control unit<br />

Front panel Display Rear panel 229 Remote<br />

Index<br />

Tips<br />

Appendix<br />

Symptom Cause/Solution Page<br />

Operations cannot be performed<br />

through the remote control unit.<br />

2 Display on this unit shows noth<strong>in</strong>g<br />

• Batteries are worn out. Replace with new batteries.<br />

• Operate the remote control unit with<strong>in</strong> a distance of about 23 ft/7 m from this unit and at an<br />

angle of with<strong>in</strong> 30°.<br />

• Remove any obstacle between this unit and the remote control unit.<br />

• Insert the batteries <strong>in</strong> the proper direction, check<strong>in</strong>g the q and w marks.<br />

• The set’s remote control sensor is exposed to strong light (direct sunlight, <strong>in</strong>verter type<br />

fluorescent bulb light, etc.). Move the set to a place <strong>in</strong> which the remote control sensor will<br />

not be exposed to strong light.<br />

• The operation target zone does not correspond to the zone sett<strong>in</strong>g specified on the remote<br />

control unit. Press ZONE SELECT to select the zone to operate.<br />

• The remote control unit operat<strong>in</strong>g mode is used to operate other devices. Press the AVR<br />

button to set the operat<strong>in</strong>g mode to AVR.<br />

• When us<strong>in</strong>g a 3D video device, the remote control unit of this unit may not function due to<br />

effects of <strong>in</strong>frared communications between units (such as TV and glasses for 3D view<strong>in</strong>g). In<br />

this case, adjust the direction of units with the 3D communications function and their distance<br />

to ensure they do not affect operations from the remote control unit of this unit.<br />

8<br />

8<br />

–<br />

8<br />

–<br />

149, 158<br />

Symptom Cause/Solution Page<br />

Display is off. • Set “Display” on the menu to someth<strong>in</strong>g other than “Off”.<br />

• When the sound mode is set to PURE DIRECT, the display is off.<br />

216<br />

–<br />

206<br />

120

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!