Owner's Manual in English - Marantz US | Home

Contents
Connections
Playback
n Registering multiple players at the same time
1
Press and hold down the FAVORITE STATION 1 – 4 and
OPTION until “OK” indicator on the remote control
display is flashing, then release.
Devices to be registered at the same time Press and
Bru-ray Disc
player
P P
DVD player CD player
P P
P P
P P P
hold down
the buttons
FAVORITE
STATION 1
and
OPTION
FAVORITE
STATION 2
and
OPTION
FAVORITE
STATION 3
and
OPTION
FAVORITE
STATION 4
and
OPTION
NOTE
• Depending on the model and year of manufacture of your device, some buttons
may not operate. In this case, try “Registering by entering preset numbers”
(vpage 214).
Settings
Front panel Display Rear panel 214 Remote
Index
Tips
Appendix
2 Registering by entering preset numbers
Before starting, confirm the preset number of the device that you want
to register and the buttons that can be registered in the Preset Code
Table (vpage 279) in the Appendix.
1
2
Press and hold down the input source select button
that you want to register the preset code to and SET
until “PRSET” indicator on the remote control display is
flashing, then release.
Enter the preset number (4 digits) listed for the device in
the Preset Code Table using the number buttons (0 – 9)
on the remote control.
%
• Some manufacturers use more than one type of remote control code. Preset codes
to change the number and verify correct operation.
NOTE
• Depending on the model and year of manufacture of your device, some buttons
may not operate.