20.08.2013 Views

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

Owner's Manual in English - Marantz US | Home

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Tips<br />

Contents<br />

Connections<br />

Playback<br />

Sett<strong>in</strong>gs<br />

Front panel Display Rear panel 226 Remote<br />

Index<br />

Tips<br />

Appendix<br />

I want the volume not to become too loud by mistake.<br />

• Set the volume upper limit for “Volume Limit” <strong>in</strong> the menu beforehand. This prevents children or others from <strong>in</strong>creas<strong>in</strong>g the volume too much by<br />

mistake. You can set this for each zone (vpage 167, 204).<br />

I want to keep the volume at the same level when I turn the power on.<br />

• By default, the volume sett<strong>in</strong>g when power was previously set to standby is applied at next power on. To use a fixed volume level, set the volume level<br />

at power on for “Volume Limit” <strong>in</strong> the menu. You can set this for each zone (vpage 167, 204).<br />

I want to have the subwoofer always output audio.<br />

• Depend<strong>in</strong>g on the <strong>in</strong>put signals and sound mode, the subwoofer may not output audio.<br />

When “Subwoofer Mode” <strong>in</strong> the menu is set to “LFE+Ma<strong>in</strong>”, you can have the subwoofer always output audio (vpage 198).<br />

I want to make human voices <strong>in</strong> the movies clearer.<br />

• Use “Dialog Level” <strong>in</strong> the menu to adjust the level (vpage 161).<br />

I want to keep bass and clarity dur<strong>in</strong>g playback at a lower volume level.<br />

• Set “Dynamic EQ” <strong>in</strong> the menu to “On”. This sett<strong>in</strong>g corrects the frequency characteristics to allow you to enjoy clear sound without the bass be<strong>in</strong>g<br />

lost even dur<strong>in</strong>g playback at a lower volume level (vpage 168).<br />

I want to automatically adjust the volume level difference <strong>in</strong> content such as TV and movies.<br />

• Set “Dynamic Volume” <strong>in</strong> the menu. Volume level changes (between quiet scenes and loud scenes) <strong>in</strong> TV shows or movies are automatically adjusted<br />

to your desired level (vpage 169).<br />

I want to set the optimized listen<strong>in</strong>g environment after chang<strong>in</strong>g the configuration/position of the speakers or<br />

chang<strong>in</strong>g a speaker to a new one.<br />

• Perform Audyssey® Setup. This automatically makes the optimized speaker sett<strong>in</strong>gs for the new listen<strong>in</strong>g environment (vpage 183).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!