CAD user manual - Finn-Power International, Inc.
CAD user manual - Finn-Power International, Inc.
CAD user manual - Finn-Power International, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.8 Copy<br />
When using the Copy functions the elements to be copied must be selected first.<br />
To select an element before choosing a Copy function, you must first activate<br />
the Allow Selection icon on the toolbar.<br />
Copy- Copy selected item to defined location. <strong>CAD</strong> will ask for ‘From<br />
Point’ and ‘To Point’.<br />
Mirror Copy in Y- Copy element(s) and then mirror in the Y axis. Select<br />
element(s) and then specify a point to indicate where the mirror axis will be.<br />
Mirror Copy in X- Copy element(s) and then mirror in the X direction.<br />
Select element(s) and then specify a point to indicate where the mirror axis will<br />
be.<br />
Mirror Copy in Axis- Copy and Mirror element(s) defined by two points<br />
creating the axis.<br />
Grid Copy- Grid selected element(s) throughout a part by defining the<br />
amount in X and Y and then spacing between.<br />
Polar Copy- Polar copy selected element(s) around a point by defining<br />
the amount of times the element(s) will be copied and the angle between each<br />
copy point. The initial point will be the centre point of the polar grid whereas<br />
the angle [spacing] between the element(s) will be dependant on the centre point<br />
(radius).<br />
Linear Copy- Linear Copy element(s) along a line. Using Snap Modes,<br />
‘From Point’ and ‘To Point’ must be defined. Evaluator will ask for number of<br />
element(s) to be copied.<br />
15
Change language