DVB-T Receiver IRD 410T - FTE Maximal

More documents

Recommendations

Info

4.1 The installation c) RCA connectors The video and audio signals that you have with the scart-cable are available again through this connector. It will be interesting to connect an additional monitor or stereo set. You combine the 5 RCA-video connector with the corresponding input at your monitor and the 13 RCA-audio connector with the input at your Stereo set. Home Cinema System ... ... like Dolby Digital 5.1 system can be connected at the connections 6 and 7 . Connection to the 230V mains The power cord is built into the receiver. Be careful when you work with the power cord and pay attention to the following guidelines: ... never put objects over the power cord. ... never use the power cord over sharp objects. ... be sure that the power outlet is easily reachable, in order to be able to unplug the device in case of danger. Never pull at the power cord ! … if you plan to unplug the cord, pull directly the plug, not the cord. … be sure the power plug is securely and firmly connected. … do not use wobbly plug adapters to avoid fire risks. First steps 10 Version 1.0 © <strong>FTE</strong>maximal
4.2 The installation The receiver includes a setup wizard that helps you to configure the different parameters of the receiver. The first time the receiver is turned on (using the power switch in the receiver’s back panel), the following menu will be displayed: English Select your Language Deutsch Wählen Sie Ihre Sprache aus Francais Selectionnez votre Langue Spanish Seleccione su idioma Português Seleccione o seu idioma Italiano Selezioneare lingua Turkish Bir dil Seciniz Arab Select your Language Installation wizard With the CH buttons you can choose the desired language of the screen menu and confirm your selection with the OK button on the remote control. Once you select a language/country, the receiver automatically sets the typical settings for your country. 11 Version 1.0 © <strong>FTE</strong>maximal
Page 1 and 2: DVB-T Receiver IRD 410T Please, rea
Page 3 and 4: 1.1 Safety references Important ! R
Page 5 and 6: 2.1 Accessories Manual: Remote Cont
Page 7 and 8: 3.2 TERR. Connections and controls
Page 9: 4.1 The following steps assume, tha
Page 13 and 14: 4.2 The installation Installation w
Page 15 and 16: 5.1 Choose a channel To select a ch
Page 17 and 18: 5.3 Timer You have 2 possibilities
Page 19 and 20: 5.4 Basic operations ZOOM Press the
Page 21 and 22: 6.1 Menus and OSD To display the ma
Page 23 and 24: 6.2 Move In order to move a program
Page 25 and 26: 6.3 To open the Installation menu (
Page 27 and 28: 6.3 Menus and OSD PID With the PID
Page 29 and 30: 6.4 Menus and OSD RF Channel Choose
Page 31 and 32: 6.4 Menus and OSD To save the progr
Page 33 and 34: 6.5 Menus and OSD If you want to lo
Page 35 and 36: 6.6 If you want to change the langu
Page 37 and 38: 7.1 Troubleshooting Self help The r

DVB-T Receiver IRD 410T - FTE Maximal

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?