DVB-T Receiver IRD 410T - FTE Maximal

More documents

Recommendations

Info

5.3 Basic operations With the VOL buttons you can select Add, Edit and Delete. Timer: Add Select this option with the VOL buttons and press OK. Source TV Channel ProSieben Start Date 01/12 (DD/MM) Start Time 17:00 (HH/MM) Stop Date 01/12 (DD/MM) Stop Time 17:59 (HH/MM) Rpt 1x Only one Time Move up and down into the menu with the CH buttons, and change the values of the options with VOL ones or with the keypad 0-9 buttons. To save your selections, press OK. If you want to break off, press EXIT. Source: Select this option if you want a TV or Radio channel. Channel: With the CH buttons choose a program. Confirm your selection by pressing the OK button. Start Date: Write the Start Date with 0-9 buttons. Start Time: Write the Start Time with 0-9 buttons. Stop Date: Write the Stop Date with 0-9 buttons. Stop Time: Write the Stop Time with 0-9 buttons. Timer Timer: Edit Select this option if you want to modify an existing event. Do it with the CH buttons and then press OK. The menu is the same that Add. Timer: Delete Select this option if you want to delete an existing event. Do it with the CH buttons. The event will be deleted by pressing the OK button. 18 Version 1.0 © <strong>FTE</strong>maximal
5.4 Basic operations ZOOM Press the Zoom button on the remote control to get a picture-zooming function. When you press the Zoom button, a magnifier icon will appear on the centre of the screen. You can move the magnifier position over the screen using the CH and VOL buttons. The first zooming-stage (2x) is activated by pressing the OK button. One further zooming stage (4x) can be achieved by pressing a second time the OK button. If you press again the OK button the picture on the screen will be brought back to the original size. Press the EXIT button to leave the picture zooming function. PAUSE Press the Pause button on the remote control to freeze the image on the screen. Pressing again will bring back the normal image status. You can combine the Pause and ZOOM functions. INFO The info menu displays relevant information about the currently selected program. Press the INFO button and you will see the following window: Here you can see all the information about the program you watch (frequency, signal quality, strenght, etc). Zoom / Pause / Info TV PRO Sieben MUX 44 Frequency 658000 Mode 8K Guard 1/8 IQInvert Normal VID PID 385 AUD PID 386 PCR PID 385 TEL PID 387 Quality 93% Strength 73% 19 Version 1.0 © <strong>FTE</strong>maximal
Page 1 and 2: DVB-T Receiver IRD 410T Please, rea
Page 3 and 4: 1.1 Safety references Important ! R
Page 5 and 6: 2.1 Accessories Manual: Remote Cont
Page 7 and 8: 3.2 TERR. Connections and controls
Page 9 and 10: 4.1 The following steps assume, tha
Page 11 and 12: 4.2 The installation The receiver i
Page 13 and 14: 4.2 The installation Installation w
Page 15 and 16: 5.1 Choose a channel To select a ch
Page 17: 5.3 Timer You have 2 possibilities
Page 21 and 22: 6.1 Menus and OSD To display the ma
Page 23 and 24: 6.2 Move In order to move a program
Page 25 and 26: 6.3 To open the Installation menu (
Page 27 and 28: 6.3 Menus and OSD PID With the PID
Page 29 and 30: 6.4 Menus and OSD RF Channel Choose
Page 31 and 32: 6.4 Menus and OSD To save the progr
Page 33 and 34: 6.5 Menus and OSD If you want to lo
Page 35 and 36: 6.6 If you want to change the langu
Page 37 and 38: 7.1 Troubleshooting Self help The r

DVB-T Receiver IRD 410T - FTE Maximal

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?