DVB-T Receiver IRD 410T - FTE Maximal
DVB-T Receiver IRD 410T - FTE Maximal
DVB-T Receiver IRD 410T - FTE Maximal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.1<br />
The following steps assume, that ...<br />
... the receiver is properly set up.<br />
Important:<br />
The installation<br />
Unplug the receiver if you wish to carry out connection tasks.<br />
Connection ...<br />
... for connecting your receiver to the antenna you need a long coaxial cable suitable for<br />
digital reception (for example, <strong>FTE</strong> K 290). If the F connectors are not mounted into the<br />
connecting cables yet, please proceed to mount the connector as follows:<br />
Please connect the F connector from antenna, to connection 1 of the back side of the<br />
receiver. Install the small connecting cable between the connectors 10 and 2 .<br />
Indoor antenna will be supported by <strong>IRD</strong> 420T/SM on connector 3.<br />
To use 5V , you need a DC injector. It will be placed between connector 1 and the F<br />
connector of the coaxial cable.<br />
Connecting television receiver and video tape recorder<br />
You will achieve an optimal transmission quality if you connect the television receiver and<br />
the video tape recorder with an Scart-cable using the corresponding socket of the<br />
receiver.<br />
a) Use a scart cable<br />
A single scart-cable is enough for the connection to the TV set.<br />
First steps<br />
b) About the antenna cable<br />
Here you can also combine the terrestrial receiver with your TV set or video tape recorder.<br />
However, the transmission quality is a little poorer.<br />
9 Version 1.0 © <strong>FTE</strong>maximal