DVB-T Receiver IRD 410T - FTE Maximal

1.1
Safety references
Important !
Before you start operating the receiver, make sure that the
receiving antenna is properly built up, connected and aligned
optimally.
The correct place to install the receiver is, of course, near your
TV set and any other A/V signal sources (DVD, VCR; CD;
game console, etc).
Choose an stable support, where you can easily lay the
necessary connecting cables without stumbling-danger. The
receiver should be installed near to an easily accessible outlet.
Do not install the receiver in a place where it can be reached by
liquid spills.
Do not put any heavy objects as, for example, a TV-device over
the receiver because the receiver could be damaged.
Do not install the receiver:
- On an unstable surface
- Subject to direct sunlinght
- In a high humidity environment
- Outside the receiver’s temperature range (+5°...+40°)
If the receiver is subjected to severe temperature changes, it
can suffer from water condensation inside. Switch off the
receiver in these cases for at least 2 hours before resuming
operation.
4 Version 1.0 © FTEmaximal