NetSure ITM Installation Manual - Gruber Power

2.2 Row-Based Installation Example
Installation Drawings and Recommended Tools and Test Equipment
The NetSure ITM DC UPS system provides the flexibility to meet the needs of any data center.
The NetSure ITM DC UPS system is delivered fully configured for quick and easy field installation.
Multiple DC UPS modules can easily be connected on site in order to increase capacity. Each module
takes only 24" (w) x 41" (d) of floor space, including batteries and primary distribution. The NetSure
ITM DC UPS system is typically installed in the middle or at the end of a row of server racks. This
makes the system uniquely flexible and scalable. Deploy only the capacity that is initially needed;
modules can be added at any time to any row configuration on the data center floor.
Figure 4 depicts a top distribution feed installation powering IT racks. Depending on your site and
budget requirements, the NetSure ITM DC UPS solution can either be installed as a single deployment,
or incrementally by row. In either scenario, DC distribution cabling to each rack is reduced by
placing the NetSure ITM DC UPS in-the-row.
Whatever the physical layout of your data center, the NetSure ITM DC UPS allows for maximum
space for IT equipment. With DC UPS building block modules, you can mix and match configurations
and standard layouts to fit your available space.
Figure 4
NetSure ITM Row-Based DC UPS System Installation Example
11