NetSure ITM Installation Manual - Gruber Power

Specifications and Technical Data
7.0 SPECIFICATIONS AND TECHNICAL DATA
7.1 Agency Approvals
The NetSure ITM DC UPS system has the following agency approval ratings:
• EN 60 950-1:2006
• UL 60 950-1
• UL 1801 (This unit is UL Listed ["c UL"] as a DC Power Distribution Center. This unit meets the
requirements of CSA 22.2, No. 225 and is tested and Certified by UL ["c UL"] as a Custom Built
Power Distribution Center.)
7.2 Environmental
The NetSure ITM DC UPS system is designed to operate under the following environmental conditions
without damage or degradation in electrical operating characteristics:
Table 7
DC UPS System Environmental Characteristics
System Operating Temperature
System Storage Temperature (optimal)
Relative Humidity
Operating Elevation
Audible Noise < 60dB
Heat Rejection at Full Load
EMI
7.3 Mechanical Characteristics
Table 8
Form Factor
Unit Dimensions
Unit Weight
Airflow
Cable Entry
Color
+23°F to +95°F (-5°C to +35°C)
Recommended Operation with Battery (Air Inlet):
+68°F to +77°F (+20°C to +25°C)
-4°F to +77°F (-20°C to +25°C)
0 to 95%, non-condensing
6562 ft (2000m) at full power
18,096 BTU/hr. (5.3kW) per module
FCC Class A
DC UPS System Mechanical Characteristics (per module)
Protection Grade
(with open/closed front doors)
Rack
Inches: 83H x 24W x 41D
(Millimeters: 2100H x 600W x 1040D)
3240 lb (1470 kg)
560 CFM (950 m3/h)
Bottom or Top
Black (Z-0350)
IP 20
46