HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Threading tools
Thread formers
Continued next page
M
1xd
Non-cutting-machine-thread formers
metric ISO thread DIN 13, for through and blind holes, 2 1 /2 threaded start
3xd
ISO 2 x
ISO 3 x
C (2-3)
Execution: structural dimensions similar to DIN 371 = reinforced shaft (up to M 10),
DIN 376 = overrun shaft (from M 12).
Ident. No. 330-416
Ident. No. 530-616
DIN 2174
Ident. No. 020-100 Ident. No. 130-216
Version Without oil grooves With oil grooves
Material HSSE HSSE HSSE HSSE
Tolerance ISO 2 ISO 2 ISO 3 ISO 2
Structural dimensions DIN 371 371/376 371/376 371/376
Surface TiN TiN TiN AlCrN
Max. depth of thread 1 x d 3 x d 3 x d 3 x d
Size Inclination Core hole Ø Overall
length
Shank Ø h 9 Shank V h 12 13394 13394 13394 13394
M mm mm mm mm mm Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E
2 0,40 1,80 45 2,8 2,1 020 O. R. – – – – – –
2,5 0,45 2,30 50 2,8 2,1 025 O. R. – – – – – –
3 0,50 2,80 56 3,5 2,7 030 O. R. 130 O. R. 330 O. R. 530 O. R.
3,5 0,60 3,25 56 4,0 3,0 035 O. R. – – – – – –
4 0,70 3,70 63 4,5 3,4 040 O. R. 140 O. R. 340 O. R. 540 O. R.
5 0,80 4,65 70 6,0 4,9 050 O. R. 150 O. R. 350 O. R. 550 O. R.
6 1,0 5,55 80 6,0 4,9 060 O. R. 160 O. R. 360 O. R. 560 O. R.
8 1,25 7,40 90 8,0 6,2 080 O. R. 180 O. R. 380 O. R. 580 O. R.
10 1,5 9,30 100 10,0 8,0 100 O. R. 200 O. R. 400 O. R. 600 O. R.
12 1,75 11,20 110 9,0 7,0 – – 212 O. R. 412 O. R. 612 O. R.
16 2,0 15,00 110 12,0 9,0 – – 216 O. R. 416 O. R. 616 O. R.
Application Steel (N/mm²) Stainless st. Aluminium Brass Bronze Plastics Graphite/ Gray cast Ti Ni Super