HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Cutter blade holders
Ident. No. 010-030 tool clamping by drawing together the split front part of the holder. For right and left-hand cutting tool (reversing)
Ident. No. 040 with clamping claw and clamping screw . For right-hand cutting tool
Lathe tools
KOMET lathe and cut-off tools
Metal-cutting tools
Sizes A 00, A 0, AE
Size A I/Iia
Size A 00 A 0 AE A I/II a
Holder dimensions:
Stock height: A mm 16 18 18 22
Stock width: B mm 11 11 11 14,5
Overall length: C mm 100 125 125 170
Cutter face height: D mm 12 14 14 20
For cutting-off tool (see below) A00 A0 – A I/II a
For direct fitting recessing cutters – – A 0,9-2,15 A 2,65-5,15
With insert adapter – – – A 0,9-2,15
17100 Ident. No. 010 020 030 040
Unit price E O. R. O. R. O. R. O. R.
h Cutting-off and recessing tool see No. 17102-17110 page 365. Prod. Gr. 172
Continued next page
Cutting-off tools
Version HSS F quality
(12 % W, 5 % Co)
Carbide
quality P 20
Size A 00 A 0 A I/II a A 0-R A I/II a-R
Height E mm 8 10 16 10 16
Width F mm 2,2 2,7 4 2,7 4
Length L mm 75 100 150 100 100
Ident. No. 010 020 040 020 040
17102 Unit price E O. R. O. R. O. R. – –
17106 Unit price E – – – O. R. O. R.
Prod. Gr. 172
No. 17102
HSS cutting-off tool,
can be used for right or left
No. 17106
Cutting-off tool with carbide indexable insert
right-hand only
Continued next page
Recessing cutters
HSS F quality (12 % W, 5 % Co)
Application: for making outside round slots in locking rings
Cutter size A 0.9-2.15 for direct accommodation in holder No. 17100, size AE, or with insert adaptor in
holder size A I/II a.
Cutter size A 2.65-A 5.15 for direct accommodation in holder size A I/II a
For holder size AE and AI/II a * A I/II a
For recessing cutters A 0,9 A 1,1 A 1,3 A 1,6 A 1,85 A 2,15 A 2,65 A 3,15 A 4,15
For ring width mm 0,8 1,0 1,2 1,5 1,75 2,0 2,5 3,0 4,0
Blade width F h 11 mm 0,9 1,1 1,3 1,6 1,85 2,15 2,65 3,15 4,15
Cutter height E ± 0.1 mm 11 11 11 11 11 11 16 16 16
Cutter length L mm 80 80 80 80 80 80 150 150 150
17110 Ident. No. 090 110 130 160 185 215 265 315 415
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
No. 17110 recessing tool in holder
Recessing cutters A 0.9 to A 4.15
for right and left hand use
h * Insert adaptor No. 17110 001 is required for holder size A I\II a. Prod. Gr. 172
Continued next page
Insert adaptor
For accommodation of recessing cutters, sizes A 0.9-A 2.15 in the holder size A I/II a
For recessing cutters Size A 0.9 - A 2.15
17110 Ident. No. 001
Unit price E O. R.
Prod. Gr. 172
2011/12
365