HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools
HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools
HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Continued next page<br />
AC 400 cooling lubricant for carbide grinding<br />
water-soluble<br />
AC 400 is a water-soluble coolant free from mineral oil, chlorine, nitrite and zinc. In mixed state, the coolant<br />
is a transparent, clear solution. AC 400 provides good corrosion protection, it is extremely low foaming, it<br />
does not leave any adhesive residuals and it provides a good wetting and rinsing. A good skin compatibility<br />
is ensured by the careful selection and combination of the ingredients.<br />
Advantages:<br />
•free from mineral oil, chlorine, nitrite and zinc<br />
•no cobalt solubility<br />
Application: particularly for grinding carbide<br />
•very solid solution<br />
•skin-friendly<br />
Contents l 25 165<br />
18300 Ident. No. 075 077*d<br />
Unit price E (O. R.) (O. R.)<br />
Ident. No. 075<br />
Coolants and lubricants<br />
<strong>Cutting</strong> oils<br />
<strong>Metal</strong>-cutting tools<br />
* Delivered ex works, postage<br />
Please observe: for <strong>2011</strong> / 20<strong>12</strong> we reserve the right to temporarily adjust the prices due to the<br />
strongly fluctuating prices for raw materials and for energy.<br />
h With your first order, we recommend to get the safety data sheet.<br />
j Safety data sheet also available at www.hahn-kolb.de/Downloads.<br />
Prod. Gr. 147<br />
Ident. No. 077<br />
Continued next page<br />
HX universal high-performance cutting oil<br />
HX are high-performance cutting oils which can be used for an optimum machining of both high alloy steels<br />
and non-ferrous metals and aluminium.<br />
This is absolutely innovative in the state-of-the-art manufacturing technology.<br />
Several expensive works, such as separate manufacturing lines for mixed machining, premature washing<br />
of the work pieces in non-ferrous metals, as well as mixing of different machining oils in the manufacturing<br />
process can be omitted.<br />
These cutting oils are particularly suited for the vmax machining.<br />
Advantages:<br />
•vmax technology<br />
•massive increase of the tool life<br />
•excellent workpiece surfaces<br />
Application:<br />
•universal use in nearly al materials<br />
•machining with increased cutting values (vmax technology)<br />
•cut data can be optimally adjusted<br />
•very skin-friendly<br />
•highest cost effectiveness:<br />
HX 10 HX 15 HX 22<br />
Viscosity ISO VG 10 ISO VG 10 ISO VG 15 ISO VG 15 ISO VG 22 ISO VG 22 ISO VG 22 ISO VG 22<br />
Contents l 63 210 62 208 5 25 61 204<br />
18300 Ident. No. 047d 048*d 052*d 053*d 055 056 057*d 058*d<br />
Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)<br />
* Delivered ex works, postage<br />
Please observe: for <strong>2011</strong> / 20<strong>12</strong> we reserve the right to temporarily adjust the prices due to the strongly fluctuating prices for raw materials and for energy.<br />
h With your first order, we recommend to get the safety data sheet.<br />
j Safety data sheet also available at www.hahn-kolb.de/Downloads.<br />
Prod. Gr. 147<br />
Continued next page<br />
LX universal cutting oil<br />
LX universal cutting oils are multi-purpose oils on the basis of condiment-poor mineral oils. They contain<br />
anti-aging and anti-corrosion agents as well as EP additives. Thus, the mechanical load capacity and the<br />
cutting performance are increased. The LX-series is light, with low evaporation, mild odour and even under<br />
unfavourable work conditions they do not tend to foaming or excessive formation of oil mist. The LX-varieties<br />
are free from chlorine and heavy metals.<br />
Advantages:<br />
•non-ageing and skin-friendly<br />
•little odour and little mist<br />
•excellent surface quality<br />
•long tool life<br />
•good exploitation of the machine capacity •rationalisation effect because suitable for machine lubrication<br />
Application:<br />
•preferred application and cutting oil on automatic lathes and multi-spindles<br />
•toothing processes, such as hobbing and tooth flank grinding<br />
•with corresponding viscosity it also can be used as hydraulic oil<br />
LX 10 LX 15 LX 22<br />
Viscosity ISO VG 10 ISO VG 15 ISO VG 22<br />
Contents l 201 204 203<br />
18300 Ident. No. 018*d 023*d 028*d<br />
Unit price E (O. R.) (O. R.) (O. R.)<br />
* Delivered ex works, postage<br />
Please observe: for <strong>2011</strong> / 20<strong>12</strong> we reserve the right to temporarily adjust the prices due to the<br />
strongly fluctuating prices for raw materials and for energy.<br />
h With your first order, we recommend to get the safety data sheet.<br />
j Safety data sheet also available at www.hahn-kolb.de/Downloads.<br />
Prod. Gr. 147<br />
<strong>2011</strong>/<strong>12</strong><br />
467
Change language