HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Boring bars
Type UBN 91°
For UNISIX indexable inserts type W00... or W28....
RH cutter geometry, square shank, short
See UNISIX indexable inserts No. 17756 page 400 or No. 17762 page 401 (left hand or standard
insert to the right hand holder)
Indexable insert directly fixed in ballast
Note: clamping screws are continuously changed from Torx to TorxPlus. Therefore, it is possible that still
Torx screws are delivered.
Boring bars
Lathe tools
KOMET insert holders
Clamping screws
Packed set = quantity 10
Boring bars Boring bars To fit UNISIX
Type Sizes Indexable inserts
D min. b H h 1 I 1 I 2 I 3 f No. 17756 No. 17762 17815 Size 17769
mm mm mm mm mm mm mm mm Type Type Ident. No. U. pr. E Ident. No. U. pr. E
UBN 1-801 FR 25 16 16 0,5 150 70 6,5 21 W00 34... W28 34... 001 O. R. M 3,5 x 5 - 8IP 456 O. R.
UBN 2-810 FR 30 20 20 0,5 200 100 7,5 26 W00 42... W28 42... 002 O. R.
UBN 3-820 FR 40 25 25 1 245 120 9,5 33 W00 50... W28 50... 003 O. R.
M 4,5 x 9 - 10IP 458 O. R.
Metal-cutting tools
h Screwdriver:
No. 52143 108 page 1175 to fit clamping screws No. 11146 456.
No. 52143 110 page 1175 to fit clamping screws No. 11146 458.
Prod. Gr. 172
2011/12
403