HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Knurling and broaching tools
Knurls, knurling tools
Continued next page
Knurl cutting tool
for lathes and automated lathes, CNC and conventional
Application: for knurled sections on the workpiece (DIN 82): RAA, RGE 30°, RGE 45°. Recessed and axial
knurl; tip height to be adjusted.
Knurling wheels: RAA = 2x AA; RGE 30°/45° = 1x BL 30°/45° and 1x BR 30°/45°. With flexible centring.
Box qty.: No. 19011 = 5 pieces
Shank section Height x Width mm 20 x 20
For knurl cutter mm 20x8x6
For workpiece Ø mm 10–80
19006 Holder without knurl cutter Ident. No. 030
Unit price E O. R.
19011 Carbide–running pin Ø 6 x 20 mm with plane faces Ident. No. 620
Unit price E O. R.
h See knurls No. 19014 and 19016 page 459. Prod. Gr. 191
Continued next page
Knurl cutting tool
for lathes and automated lathes, conventional
Application: for knurled sections on the workpiece (DIN 82): RAA, RGE 30°, RGE 45°. Recessed and axial
knurl; tip height to be adjusted.
Knurling wheels: RAA = 2x AA; RGE 30°/45° = 1x BL 30°/45° and 1x BR 30°/45°. Knurled carrier
simply adjustable to Ø and tip height; no lateral contact pressure; the spindle, tips and bearings of the
machine are not affected because the knurling pressure is absorbed by the tool itself. Secured running
pins, improved handling.
Box qty.: No. 19011 = 5 pieces
Shank section Height x Width mm 20 x 20
For knurl cutter mm 20x6x6
Working area mm 25-55
For workpiece Ø mm 5–50
19008 Holder without knurl cutter Ident. No. 030
Unit price E O. R.
19011 Carbide–running pin Ø 6 x 20 mm with plane faces Ident. No. 620
Unit price E O. R.
h See knurls No. 19014 and 19016 page 459. Prod. Gr. 191
Continued next page
Knurling tool kit
for lathes and automated lathes, conventional
Application:
For knurled sections on the workpiece (DIN 82): RAA, RGE 30°, RGE 45°, can be used for inscriptions.
Set consisting of:
•knurling tool (see Figure 19004), shank dimensions 16 x 16 mm and 108 mm in length, for knurling
wheels 20 x 8 x 6 mm + HSS knurling wheel 1 x AA, division 0.8 mm
•knurling tool (see Figure 19006), shank dimensions 20 x 20 mm and 130 mm in length, for knurling
wheels 20 x 8 x 6 mm + HSS knurling wheels, 1 part each AA, BL 30°, BA 30° with division 0.8 / 1.0 /
1.2 mm
•3 spare running pins
19009 Knurling tool kit Ident. No. 010
Unit price E O. R.
Prod. Gr. 191
458 2011/12