Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix 116/132<br />
9.1.3 Extended Device Diagnostic ASCII<br />
In this section the task states <strong>for</strong> ASCII devices are described.<br />
9.1.3.1 ASCII Protocol<br />
Figure 71: ASCII Protocol<br />
Variable<br />
Task state<br />
Send telegrams<br />
Receive telegrams<br />
Send errors<br />
Receive errors<br />
Error bits (hex)<br />
Last error<br />
Table 68: ASCII Protocol<br />
Meaning<br />
Actual state of the protocol process:<br />
0 = not initialized<br />
1 = basic state<br />
2 = telegram sequence time expires<br />
3 = sending mode<br />
4 = receiving mode<br />
Number of faultless transmitted telegrams<br />
Number of faultless received telegrams<br />
Number of send tasks which got lost because of Syntax or<br />
transmission errors<br />
Number of errors which have occurred by receiving data<br />
Assigns every reported error to an error class and shows this<br />
by setting a bit. It is only displayed, if the error has executed<br />
in spite of repeat a telegram loss<br />
Number of the last reported error. It is only displayed, if the<br />
error has occurred in spite of repeat a telegram loss<br />
The description of the error numbers see on the DVD in the<br />
manual asc_pre.pdf<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language