Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Settings 52/132<br />
Parity:<br />
Determination of the Parity bit. You can select no, even and odd.<br />
RTS control:<br />
The RTS control must be activated (selected) if you use a RS485 interface.<br />
If you use a RS422 or RS232 interface you need not to select this option.<br />
Priority:<br />
Fixes which device is put back the send telegram in case of an initialization<br />
conflict. The priority can be set to low or high.<br />
Idle time:<br />
Idle time in milliseconds be<strong>for</strong>e the start of a telegram repeat. The range of<br />
value is between 0 and 10000.<br />
Receive mode:<br />
Defines the type of the receive data. The following settings can be selected:<br />
word telegram MSB/LSB, word telegram LSB/MSB, byte telegram or<br />
transparent.<br />
Send mode:<br />
Defines how the word telegrams are sent of the line. Either word telegram<br />
MSB/LSB or word telegram LSB/MSB.<br />
Error LED:<br />
<strong>Operating</strong> mode of the error LED. It can be set: set/delete or only set.<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language