Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Settings 51/132<br />
5.2.7 Setting of the RK512 Parameter<br />
Via the menu Settings > RK512 Parameter the 3964R Parameter can be<br />
set, if an RK512 configuration is loaded.<br />
Figure 28: Settings > RK512 Parameter > Connection 1<br />
Description:<br />
The description of the device is shown in <strong>SyCon</strong> as the name of the device.<br />
The description is changeable in this field.<br />
Interface:<br />
Interface of the device which is served by the protocol. This option can be<br />
activated or deactivated by the user.<br />
Baud rate:<br />
Determination of the transmission rate. You have the possibility the select a<br />
Baud rate between 50 Baud and 38400 Baud. As default setting 9600 Baud<br />
is selected this is used mostly.<br />
Data bits:<br />
Number of data bits. You can select 7 data bits or 8 data bits.<br />
Stop bits:<br />
Number of stop bits. You can select 1 stop bit or 2 stop bits.<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language