Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started - Configuration Steps 15/132<br />
3.2 Configuration Ethernet<br />
3.2.1 Configuration Ethernet (TCP, UDP, ALI, SMTP, FTP)<br />
The following table describes the steps to configure a Hilscher Ethernet<br />
(TCP, UDP, ALI, SMTP, FTP) device as it is typical <strong>for</strong> many cases.<br />
# Action Menu in the <strong>System</strong> <strong>Configurator</strong> Detail in<strong>for</strong>mation in section Page<br />
1 Create a new project File > New > Ethernet/Protocol Setting up the Ethernet/Serial 20<br />
Protocol Configuration<br />
2 Choose Hilscher Ethernet Insert > Device Insert Device 21<br />
device<br />
3 Set Device Assignment Settings > Device Assignment Device Assignment 25<br />
4 Set Parameter Settings > Ethernet Parameter Setting of the Ethernet Parameter 36<br />
5 Set Device Settings Settings > Device Settings Device Settings 63<br />
6 Save project File > Save Save and Save As 81<br />
7 Download Online > Download Downloading the Configuration 68<br />
8 Transfer user data Online > Message Monitor Message Monitor 79<br />
Table 4: Steps <strong>for</strong> Configuration of an Ethernet Device<br />
3.2.2 Configuration Open Modbus / TCP Protocol<br />
The following table describes the steps to configure a Hilscher Ethernet<br />
device with the Open Modbus / TCP protocol as it is typical <strong>for</strong> many cases.<br />
# Action Menu in the <strong>System</strong> <strong>Configurator</strong> Detail in<strong>for</strong>mation in section Page<br />
1 Create a new project File > New > Ethernet/Protocol Setting up the Ethernet/Serial 20<br />
Protocol Configuration<br />
2 Choose Hilscher Open Insert > Device Insert Device 21<br />
Modbus/TCP device<br />
3 Set Device Assignment Settings > Device Assignment Device Assignment 25<br />
4 Set Parameter Settings > Open Modbus / TCP<br />
Parameter<br />
Setting of the Open Modbus / TCP<br />
Parameter<br />
5 Set Device Settings Settings > Device Settings Device Settings 63<br />
6 Save project File > Save Save and Save As 81<br />
7 Download Online > Download Downloading the Configuration 68<br />
8 Transfer user data Online > Message Monitor Message Monitor 79<br />
Table 5: Steps <strong>for</strong> Configuration of the Open Modbus / TCP Protocol<br />
42<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language