Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Settings 41/132<br />
5.2.3.5 TCP<br />
Figure 24: Settings > Ethernet Parameter > TCP<br />
Description:<br />
The description of the device is shown in <strong>SyCon</strong> as the name of the device.<br />
The description is changeable in this field.<br />
With the different Communication references 0, 1, 2 and 3 you are able to<br />
set different communication kinds which are independent <strong>for</strong>m each other.<br />
By selecting a communication kind the settings <strong>for</strong> this communication are<br />
loaded and the communication is done this way.<br />
In the field Connection type you can select between unused, Server and<br />
Client. Depending on the selected Connection type the under settings (IP<br />
address, Connect timeout and so on) are grey.<br />
If the Connection type unused is selected all other field are grey because<br />
no connection is selected.<br />
If Server is selected as Connection type the field Port number, Send<br />
timeout and Close timeout are adjustable.<br />
If Client is selected as Connection type all field are adjustable. In the field<br />
IP Address you have to type in the IP of the wanted Client. The field Send<br />
timeout, Connect timeout, Close timeout and Connect retry time are<br />
adjustable in multiple of 100 milliseconds.<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language