Operating Instruction Manual SyCon System Configurator for ...

Settings 63/132
5.3 Device Settings
To enter the Device Settings, choose the Settings > Device Settings or
click with the right mouse button on the corresponding device symbol and
select from the list that opens up.
The Device Settings contain parameters that determine the behaviour of
the device as well as the user interface. These settings are only valid for
Hilscher devices and are included in the download of the configuration.
Figure 37: Settings > Device Settings
• Handshake of the process data
These various types are used for setting the handshake of the
process data for the device. The choice of used type is important for
the correct data exchange between the application program and the
device.
The used handshake of the process data needs to be supported by
the application program. Mostly the buffered, host controlled
handshake is supported. The setting no consistence, uncontrolled
works without handshake and the processes run free.
• Configuration mode
If the device is to use the parameters of the configuration that is
downloaded from SyCon then the Configuration by SyCon mode
must be selected for the configuration mode. If the configuration is
written online from an application into the Dual-port memory, then the
Configuration by Application mode must be selected.
SyCon | System Configurator for Ethernet and serial Protocols
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012