Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Settings 49/132<br />
5.2.6 Setting of the 3964R Parameter<br />
Via the menu Settings > 3964R Parameter the 3964R Parameter can be<br />
set, if a 3964R configuration is loaded.<br />
Figure 27: Settings > 3964R Parameter > Connection 1<br />
Description:<br />
The description of the device is shown in <strong>SyCon</strong> as the name of the device.<br />
The description is changeable in this field.<br />
Interface:<br />
Interface of the device which is served by the protocol. This option can be<br />
activated or deactivated by the user.<br />
Baud rate:<br />
Determination of the transmission rate. You have the possibility the select a<br />
Baud rate between 50 Baud and 38400 Baud. As default setting 9600 Baud<br />
is selected this is used mostly.<br />
Data bits:<br />
Number of data bits. You can select 7 data bits or 8 data bits.<br />
Stop bits:<br />
Number of stop bits. You can select 1 stop bit or 2 stop bits.<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language