Operating Instruction Manual SyCon System Configurator for ...

Online Functions 72/132
6.4 Diagnostic Functions
The following table shows Diagnostic Functions and their usability for
Ethernet/Protocol devices.
Diagnostic Function
Extended Device Diagnostic
Message Monitor
Using
Table 22: Overview Diagnostic Functions
Statistic information and State information of the Hilscher
Ethernet/Protocol device
Access to mailbox of the device
6.4.1 Extended Device Diagnostic
The extended device diagnostic assists in finding communication and
configuration errors. Select the Online > Extended Device Diagnostic
menu. This menu opens a list of diagnostic structures. These contain online
counters, states and parameters.
The counter is resetted after a cold start.
Select the protocol which is used in your configuration in the following table.
In the given section you find the Extended Device Diagnostic for the
corresponding protocol.
Protocol
Page
Extended Device Diagnostic Ethernet 73
Extended Device Diagnostic Open Modbus / TCP 74
Extended Device Diagnostic ASCII 75
Extended Device Diagnostic 3964R 75
Extended Device Diagnostic RK512 76
Extended Device Diagnostic Modbus RTU 76
Extended Device Diagnostic Modbus Plus 77
Extended Device Diagnostic Modnet 1/N 77
Extended Device Diagnostic Modnet 1/SFB 78
Table 23: Selection of the Protocol for the Extended Device Diagnostic
SyCon | System Configurator for Ethernet and serial Protocols
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012