Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
Operating Instruction Manual SyCon System Configurator for ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration of Ethernet/Serial Protocol with <strong>SyCon</strong> 23/132<br />
4.2.1.3 Hardware Assignment<br />
If you have configured the CIF Device Driver Setup <strong>for</strong> your hardware and<br />
you insert the correct device in the <strong>SyCon</strong> it detects this hardware and<br />
displays at which board and which driver was detected and ask if the<br />
hardware should be assigned.<br />
Figure 5: Assign hardware<br />
If you answer with Yes the hardware is assigned. If you answer with No<br />
you have to assign this hardware with Settings > Device Assignment<br />
(look in section Device Assignment at page 25).<br />
4.2.2 Device Settings<br />
See section Device Settings at page 63.<br />
<strong>SyCon</strong> | <strong>System</strong> <strong>Configurator</strong> <strong>for</strong> Ethernet and serial Protocols<br />
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012
Change language