Operating Instruction Manual SyCon System Configurator for ...

Settings 54/132
Parity:
Determination of the Parity bit. You can select no, even and odd.
Mode:
Defines the operation mode. It makes a difference between Slave- and
Master mode. Defines additionally the valid address sector of the data.
Slave / Address: 40001-49999
Master / Address: 40001-49999 (Default setting)
Slave / Address: 1-65535
Master / Address: 1-65535
Slave / Address: 0-65535
Master / Address: 0-65535
Modbus address:
Gives the state of the address at the Modbus. The range of value is
1..2..247. 2 is the default setting.
Timeout:
Master mode: Gives the maximum time in milliseconds how long the Master
waits for an answer telegram of the Slave.
Slave mode: Gives the maximum time in milliseconds how long the Master
waits for an answer telegram of the remote partner.
The range of value is 1 to 10000 and 1000 is the default setting.
Retries:
Defines the number of telegram retries in the case of errors. Only of
importance for the Master mode. The range of value is 1 to 10 and 3 is the
default setting.
Error LED:
Operating mode of the Error LED. You can set set/delete or only set.
SyCon | System Configurator for Ethernet and serial Protocols
DOC040601OI04EN | Revision 4 | English | 2012-06 | Released | Public © Hilscher, 2004-2012