18.02.2014 Views

string

string

string

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Your attempt to attach metastate database<br />

replicas on slice "c?t?d?s?" failed for the<br />

following reason: Slice c?t?d?s? is too small<br />

to contain 1 replicas.<br />

This is because metatool masks out the very first cylinder to protect the disk label.<br />

On disksuite v4.1, metatool does allow adding the databases to cylinder 0 on<br />

2.1gb disks or larger.<br />

Action<br />

The workaround is not to start at cylinder 0 but at cylinder 1, or use the command<br />

line (metadb -a).<br />

Socket type not supported<br />

Cause<br />

The support for the socket type has not been configured into the system or no<br />

implementation for it exists.<br />

Technical Notes<br />

The symbolic name for this error is ESOCKTNOSUPPORT, errno=121.<br />

Soft error rate (int%) during writing<br />

was too high<br />

Cause<br />

This message from the SCSI tape drive appears when Exabyte or DAT tapes generate<br />

too many soft (recoverable) errors. It is followed by the advisory "Please, replace tape<br />

cartridge" message. Soft errors are an indication that hard errors could soon occur,<br />

causing data corruption.<br />

172 Solaris Common Messages and Troubleshooting Guide ♦ October, 1998

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!