string

Action
Run vxserial -p to print the available volume manager licenses in the system.
Also, check the /etc/vfstab file to make sure that the filesystem is not a vxfs
filesystem.
esp0: data transfer overrun
Cause
When a user tries to mount a CD-ROM on a third-party CD drive, mount(1M) fails
with the above error, followed by the sr0: SCSI transport failed message.
The CD drive probably comes from a vendor unknown to the system.
Action
Third-party CD drives generally have an 8192 block size, as opposed to the 512 block
size on supported Sun drives. Check with the vendor to see if any special
configuration is possible to allow the drive to operate on a Sun workstation.
Event not found
Cause
This C shell message indicates that a user tried to repeat a command from the
history list, but that command or number does not exist in the list.
Action
Run the C shell history(1) command to display recent events in the history list. If
a user often tries to run commands that have disappeared from the history list, make
the list longer by setting history(1) to a higher value.
See Also
For more information about the C shell, see csh(1).
64 Solaris Common Messages and Troubleshooting Guide ♦ October, 1998