Tornado

Tornado 2.0
User’s Guide
space—not the size of a single ROM socket. In that situation, you must adjust this
calculation.
Refer to the NetROM documentation for more information on the features
governed by these parameters.
! WARNING: On Intel i960 processors, the IMI (Initial Memory Image) file is located
at the top of the ROM, and this memory space cannot be used for communication
between the target server and the target agent (netrom dual-port RAM).
WDB_NETROM_ROMSIZE must be assigned the value WDB_NETROM_ROM_SIZE
ROM_SIZE - 0x1000. The dualport RAM base address in the NetROM must also be
modified to reflect this change. For example, for a 27020 EPROM, dprbase should
be set to 0x3e800 (rather than the default 0x3f800).
Configuration for Network Connection
To configure the target agent for use with a network connection, add the WDB
network connection component. (See 2.5.1 Network Connections, p.33).
The default MTU is 1500 octets. To change it, display the component property
sheet, select the Params tab, select WDB_MTU item and change the value associated
with it (Figure 4-46).
Figure 4-46
Network Connection Macro
140